LS Core Recovery
FACTORY RESET
Turn off the device.
Press the keys SET+NEXT+RESET
With the keys pressed, switch on the device and wait 4 seconds.
After 4 seconds, release the keys. LightShark will restart and at the next boot the console will load software version 1.0.
After restoring the device to version 1.0 please update it to the latest software version. Version 1.0 is for recovery only.
During the upgrade process to the latest version the device will reboot several times, please do not turn off the device during the process, this may take up to 4 minutes.
RESET NETWORK SETTINGS
In case you have made an incorrect network configuration or have made changes to the WiFi network, it is possible to return to the original factory settings as follows:
Turn off the device.
Press the keys NEXT+RESET
With the keys pressed, switch on the device and wait 4 seconds.
After 4 seconds, release the keys. LightShark will restart and at the next start the network settings will be reset to factory settings.