Recording Scenes

All show information storage is carried out by the programmer and lightShark uses this information when recording Playbacks, palettes, groups... The programmer has priority over all PlayBacks, Cues, Cuelist and channels. A fixture is included in the programmer when any attribute is modified.

The CLEAR button illuminates when there is information inside the programmer. Press the "CLEAR" button to erase the information inside the programmer and all channels will be removed from the programmer and the HTP channels will be reset. It is possible to change the behavior of the "CLEAR" from the main menu by choosing to return all channels to the default value defined in the library.

When the "FIND" button is pressed and there is a selected fixture then we are activating the parameters that have been defined in the library for “FIND”.

The programmer window allows the user to see what is in the programmer and how it is configured. It is possible to access the programmer window from the top navigation bar by clicking on the PROG/OUT tab.

On the left the fixtures are shown and on the right the values of the active parameters in the programmer. It is possible to display the rest of the parameters by scrolling over the parameter columns. 

It is possible to display the values in decimal or in %.