LS 1 Keystrokes

SHOW FIRMWARE VERSION

  1. Turn off the console.

  2. Press the keys NEXT+PREV+DBO.

  3. With the keys pressed, switch on the console and wait 4 seconds.

  4. After 4 seconds, release the keys. The LCD will display the firmware version.

HARDWARE TEST IN LS 1

  1. Turn off the console.

  2. Press the keys NEXT+PREV+10

  3. With the keys pressed, switch on the console and wait 4 seconds.

  4. After 4 seconds, release the keys. LightShark will show on the LCD a small utility to check the Hardware.

TURNING OFF THE LS 1 BY KEYSTROKE

It is possible to turn off the LS-1 console from the control surface by holding down the DBO+CLEAR keys for 3 seconds.