LS 1 Recovery
FACTORY RESET
Turn off the console.
Press the keys NEXT+PREV+1
With the keys pressed, switch on the console and wait 4 seconds.
After 4 seconds, release the keys. LightShark will restart and at the next boot the console will load software version 1.0.
After restoring the console to version 1.0 please update it to the latest software version. Version 1.0 is for recovery only.
During the upgrade process to the latest version the console will reboot several times, please do not turn off the console during the process, this may take up to 6 minutes.
RESET NETWORK SETTINGS
In case you have made an incorrect network configuration or have made changes to the WiFi network, it is possible to return to the original factory settings as follows:
Turn off the console.
Press the keys NEXT+PREV+2
With the keys pressed, switch on the console and wait 4 seconds.
After 4 seconds, release the keys. LightShark will restart and at the next start the network settings will be reset to factory settings.