It is possible to assign different waiting and fade times to each of the Cues. You can access a CueList's information from the CueList view or by quickly pressing twice on the Playback number.
Each Cue has a Crossfade time where you can define a Fade In time and a Fade Out time.
Access a CueList
Hold down the "HALT" field to assign the Cue a wait time.
Hold down the "CROSSFADE" field to assign a transition time between one Cue and the next.
Hold down the "FADE IN" field to assign an input fade time.
Hold down the “FADE OUT” field to assing a Fade Out (if necessary )
It is possible to change the time values of multiple cues at the same time.
SET A CUELIST AS CHASE
It is possible to use a CueList to make a Chase. Thus any wait time is ignored and each cue becomes a Chase step, where there is a global "Xfade" and "Rate" time for all Cues that make up the CueList.
You can switch from one mode to another using the "Chase Mode" or "Step Mode" buttons.

In the SHOW SETTINGS main menu it is possible to select the Chase workind mode, being able to choose between BPM and Seconds.
To adjust the BPM, press the TAP button repeatedly until the ring is complete,.
If you are using an LS-1 you can adjust the BPMs by holding down the Playback selection button and entering the pulses with the Flash button.